QUANTUM™ HD COMPRESSOR CONTROL PANEL
OPERATION
090.040-O (MAR 12)
Page 128
DESCRIPTION: Using this screen, the user can set the op-
eration of the Oil Pump, if installed.
OIL PUMP
Oil Pump - A Pump On/Off indicator (blue text)
is provided here to alert the user as to the ac-
tual status of the Oil Pump (if applicable). A drop
down menu is also provided, and there are two
states that can be selected for oil pump opera-
tion, they are:
Manual - The user has control over the run-
ning of the pump. To run the pump, simply
observe the blue text indicator to ensure
that the pump is not already running, and if
not, then press the [On/Off] toggle button.
The blue text indicator will change from Off
to On. To stop the pump, press the toggle
button again, and the pump indicator will
change to Off.
Automatic - If the pump is set to Automatic
mode, the Quantum™ HD software program
is controlling the pump operation. In this
mode, if the toggle key is pressed, the mode
will be changed from Automatic to Manual
Mode, and the current state of the pump
(digital output 3) will toggle also.
SERVICE
Oil Pump
ACCESSING:
Oil Pump
To Next Page
Loading...
