Johnson Controls FRICK QUANTUM HD - User Defined

QUANTUM™ HD COMPRESSOR CONTROL PANEL
OPERATION
090.040-O (MAR 12)
Page 130
DESCRIPTION: Using this screen, the user can view up to
eight (8) user defi nable maintenance schedules. Each of
the user defi ned schedules may be custom named. This
screen is based upon the Maintenance Schedule that is
provided in the IOM manual for the specifi c compressor
package.
The function of this screen is exactly the same as already
described on the previous page (Maintenance - Factory),
with the exception that the user can custom name events
here.
USER DEFINED
Modifying numerical values
When using the touchscreen, simply touch
the box that you wish to change, and enter
the new value into the setpoint box, then
press [Enter].
When using the physical keypad, simply use
the [Tab] key to scroll down the lists, or the
[Left Arrow] key to scroll up the lists. When
the box that you wish to change is highlight-
ed, you may enter the new value using the
numerical keys, then press the [Enter] key
to accept the value.
Modifying Text (User Defi ned) Boxes
When using the touchscreen, simply touch
the box that you wish to change, and enter
the new name using the pop-up keyboard,
then press [Enter].
To modify any of the text boxes on this
screen, simply use the [Tab] key to scroll
down the lists, or the [Left Arrow] key to
scroll up the lists. Once the box that you
wish to change is highlighted, use the [Up
Arrow] key. A new screen (Alpha) showing
a numerical keypad will appear. Refer to the
Alpha screen description for information on
entering text messages. Press the [Enter]
key to accept the text. The user may type
in a custom name up to 20 characters long.
SERVICE
Maintenance (User Defi ned)
ACCESSING:
Maintenance User Defi ned