QUANTUM™ HD COMPRESSOR CONTROL PANEL
OPERATION
090.040-O (MAR 12)
Page 32
DESCRIPTION: These screens allow the technician to view
all of the serial communications information via these logs
that the Quantum™ HD has received and transmitted.
COMM 1 (2, 3) LOG
Simply select the Comms 1 Log, Comms 2 Log
or Comms 3 Log buttons on the left side of the
screen that corresponds to the port that you
wish to view. The selected port name (in this
case Comm 1 Log) will appear in the blue status
bar.
Each time a new command is sent or received,
the screen will refresh automatically.
This screen will display all data that is coming
through the selected Communications (Comm)
port. The top line of data is the most recent ac-
tivity. At the left of each line, you should see
whether the data is IN or OUT (Receive or Send),
and the actual data (in Hexadecimal format).
This information can be used to compare against
the data being sent and received at the other
end of the communications link, to verify proper
operation.
STATUS
Panel - Comms 1-3 Log
ACCESSING:
Panel Comm 1 Log
To Next Page
Loading...
