QUANTUM™ HD COMPRESSOR CONTROL PANEL
OPERATION
090.040-O (MAR 12)
Page 133
DESCRIPTION: The Software Maintenance screen has
been provided as a way for the user to upload new oper-
ating software to their system, save setpoints or restore
setpoints.
SOFTWARE SERVICE
Locally Saved Setpoints
Any previously saved setpoint data fi les will
be shown here, by the fi le name that the
user assigned to the fi le. The date and time
stamp will be shown next to the fi le name.
To delete one or more fi les, simply click on
the fi le name bar, and you will be prompted
with a warning message that the fi le will be
deleted.
Save Setpoints
Setpoint Name - Selecting this box will
call up the keyboard overlay. Use the on-
screen keyboard to enter a custom name
for the setpoint fi le that you wish to cre-
ate. When fi nished, press the [Enter] key on
the keyboard. The on-screen keyboard will
be removed, and you will see your custom
named fi le in the Setpoint Name box. You
will next need to select the location to save
the setpoint data fi le to, by selecting Save
Location.
Save Location - Selecting this button will
cause the following options to be shown:
• Locally - Selecting this option will
save the compressor setup locally
to the panel.
• USB Thumb Drive - Select this
button if Uploading from or Down-
loading to a USB thumb drive. In-
stall the drive to one of the two
USB ports at the lower left corner
of the Q5 processor board.
NOTE: Devices that are formatted using
any of the following formats have been
verifi ed to function properly:
Windows:
• FAT32
• NTFS
• FAT
Linux:
• Linux ext2
Although numerous brands and stor-
age sizes of USB thumb drive devices
have been tested for compatibility with
the Quantum™ HD system, there is a
possibility that not all USB thumb drives
will work.
SERVICE
Software
ACCESSING:
Software
To Next Page
Loading...
