Johnson Controls FRICK QUANTUM HD - Capacity Volume

QUANTUM™ HD COMPRESSOR CONTROL PANEL
OPERATION
090.040-O (MAR 12)
Page 55
DESCRIPTION: This screen is used to view and set the
capacity and volume calibration values.
The following information is provided:
CAPACITY
Value - The following three values are shown:
Low - The Low end percentage of range.
Current - The Current percentage.
High - The High end percentage of range.
Volts - The following three values are shown:
Low - The Low end actual voltage of the
output.
Current - The Current voltage of the output.
High - The High end actual voltage of the
output.
Mode - One of the following Mode states will
be shown:
• Manual
• Automatic
• Remote Comm
• Remote IO
• Remote 4-20 Input
• Remote Seq
Status - One of the following Mode statuses will
be shown:
• Idle
• Load
• Unload
VOLUME
Value - The following three values are shown:
Low - The Low end percentage of range.
Current - The Current percentage.
High - The High end percentage of range.
Volts - The following three values are shown:
Low - The Low end actual voltage of the
output.
Current - The Current voltage of the output.
High - The High end actual voltage of the
output.
Mode - One of the following Mode states will
CALIBRATION
Capacity Volume
ACCESSING:
Capacity Volume