Johnson Controls FRICK QUANTUM HD - Page 60

QUANTUM™ HD COMPRESSOR CONTROL PANEL
OPERATION
090.040-O (MAR 12)
Page 60
• 1 - The Low End value will increase by
1% each time this button is selected.
• 0.1 - The Low End value will increase by
0.1% each time this button is selected.
• 0.01 - The Low End value will increase
by 0.01% each time this button is se-
lected.
Calibrate High End - Select this button to set
the High End calibration value, then select the
following buttons to achieve the desired setting:
• -10 - The High End value will decrease
by 10% each time this button is select-
ed.
• -1 - The High End value will decrease
by 1% each time this button is selected.
• -0.1 - The High End value will decrease
by 0.1% each time this button is se-
lected.
• -0.01 - The High End value will de-
crease by 0.01% each time this button
is selected.
The analog output channel will return to its control task
either when another output channel is selected for cali-
bration or when the user goes to another screen.