Johnson Controls HVWHP072B32S - Power Saving Functions from Wired Controller; Power Saving Guide; Water Source Unit Capacity Control

5-22
SM-18006
EXTERNAL INPUT/OUTPUT AND FUNCTION SETTING
5.3 Power Saving Functions from Wired Controller
The power saving functions are available from the wired controller COW01 as follows.
5.3.2 Water Source Unit Capacity Control
The demand function setting can be controlled from wired controller. Select from “Peak Cut Control” and
“Moderate Control” according to the situation.
NOTES:
1. The power set value (%) is just a criterion. The power set value for this function is different from the
actual power value in precision. Use the demand controller (option) when it is necessary to manage the
maximumpowercorrectly.
2. The cooling capacity will be decreased according to the power saving setting value for the reducing of
compressor motor revolution.
3. The actual electrical power consumption may be higher than the value displayed on the screen under
certain operating condition such as protective control.
4. This function is used to inhibit power consumption of the operating. Do not use it for minimize the
capacity of current and the voltage for the power circuit, power supply wiring, GFCI, transformer, etc. It
may cause actuation of interrupter and equipment fault.
without
Power Saving Setting
Maximum Capacity Operation
in Power Saving Set Value Range
Morning NightDaytime
Operation Time
Power
Consumption
Power Saving
Set Value
It can be selected from
100%, 90%, 80%, 70%
,
60%, 50%, and 40%
of reference power
consumption.
< “Moderate Control” Function >
 Themoderatecontroladjuststheairconditioningcapacitynottoexceedsthevalueofthepower
saving setting.
< “Peak Cut Control” Function >
 Thepeakcutcontrolreducesthepowerconsumptionrangewhenitexceedsthevalueofthepower
saving setting.
without
Moderate Control Setting
Moderate Control Setting
Operation Time
Power Consumption
NOTES:
1. The moderate control setting value can be set from 40% to 100% of regular capacity by every 10%.
2. The setting value is just a criterion. It might be different according to the actual service condition and
operating condition.
5.3.1 Power Saving Guide
Press “ECO” button then the power saving guide will be displayed to support the setting. Easy access to the
conrmationandsettingscreenfromthecurrentsettingstatusscreen.
Water Source Unit
Capacity
[MBH]
Reference
Power Consumption
[kW]
072 4.9
096 7.5
120 9.2
144 10.1
168 12
192 14.4
216 19.1