Johnson Controls HVWHP072B32S - Page 290

6-8
SM-18006
FIELD WORK INSTRUCTIONS
(1) Test Run Start Time
(2) Data Collect Start Time
AC
c11
c13
c14
c15
c16
c17
Cause Code of Alarm
Alarm Cause Code
Degeneracy Control for
Pressure Ratio Decrease Protection
Degeneracy Control for
High Pressure Increase Protection
Degeneracy Control for
Inverter Temperature Increase Protection
Degeneracy Control for
Discharge Gas Temperature Increase Protection
Degeneracy Control for
TdSH Decrease Protection
Degeneracy Control for Overcurrent Protection
(1) Unit Accumulated
(2) Cause of Stoppage
(3) Alarm Code / Cause Code of Stoppage
(4) Abnormal Data Indication
(1) Unit Accumulated
(2) Cause of Stoppage
(3) Alarm Code / Cause Code of Stoppage
(4) Abnormal Data Indication
(1) Unit Accumulated
(2) Cause of Stoppage
(3) Alarm Code / Cause Code of Stoppage
(4) Abnormal Data Indication
No.5No.1 No.2 No.3 No.4
No.15
No.6 No.7 No.8 No.9 No.10
No.11 No.12 No.13 No.14
(4) Information of Cause Code of Alarm
(5) Information of Cause Code of Alarm
NOTE:
Refer to Section 3.1.5 “Checking Using 7-Segment Display” for items of check mode.