Johnson Controls LSWU - FIGURE 10 - Recommended Service and Maintenance Clearance with Airside Economizer (LSW_050-060)

JOHNSON CONTROLS
20
FORM 145.05-NOM7
ISSUE DATE: 10/31/2019
SECTION 2 – INSTALLATION
FIGURE 10 - RECOMMENDED SERVICE AND MAINTENANCE CLEARANCE WITH AIRSIDE ECONOMIZER
(LSW_050–060)
075-83756-907 REV A-
NOTE:
1. All dimensions are in inches.
NO. FILTER OPTIONS “A”
1 4 inch lter 82.00
2 4 inch prelter + 4 inch high efciency lter 86.25
99.94
inch
24 inch clearance required
on standard units, 3 inch
clearance required on units
with low clearance option.
24 inch clearance
required on standard
units, 3 inch clear-
ance required on units
with low clearance
option.
Removable door with
hinges. One door handle
and tool operated latch.
Entry door standard
18 inch wide x 84
inch high nominal
with one door handle
and tool operated
latch.
Electrical panel door.
Non removable with
hinges. One door
handle and tool
operated latch.
Optional when clear-
ance is available.
Removable doors
with hinges. One door
handle and one tool-
operated latch.
Removable internal
panel is provided
for access to wa-
ter valves when no
leftside clearance is
required.
42 inch
Clearance
18 inch Clearance
FRONT
COIL SECTION
FILTER SECTION
REAR
AIRSIDE
ECONOMIZER
LEFT
RIGHT
FAN
SECTION
34.22 inch
“A”