JRC JMR-7210-6X - Page 605

18-3 Section 18 Setting up the Operation Mode
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
Classification pane display targets
The table below provides the descriptions of the classification panes that are displayed by
RADAR and ECDIS and the related sections.
Classification pane
Display target
Related section
RADAR ECDIS
Signal Process(Basic) -

18.2 Basic Settings for Radar Signal Processing
Signal Process
 
18.3 Setting Radar Signal Processing
Obs, Scene Preset

- 18.4 Presetting Each Observation Scene
Trails

- 18.5 Setting Other Ship's Radar Trails
TXRX

- 18.6 Setting Radar Antennas
Association
 
18.7 Setting Associations
Ship's Dynamic Trait
 
18.8 Setting Dynamic Traits of Own Ship
TT Test

- 18.9 Setting Operation Tests
Filter
 
18.10 Setting AIS Filters
Target Track
 
18.11 Setting the Target Track Function to
ON/OFF
Route
 
18.12 Setting Parameter Values at Route Plan
Creation
Autosail
*1
 
18.13 Setting Automatic Sailing Parameter
Values
Temporary Route
 
18.14
Chart
*2
-

18.15 Setting Chart Operation
Logbook -

18.16 Setting Logbook
NAVTEX
 
18.17 Setting NAVTEX
General
 
18.18 Setting Navigation Equipment
Color and Brightness
 
18.19 Setting Colors and Brightness
Sounds
 
18.20 Setting Sounds
Key Assignment
 
18.21 Setting Key Assignment
Preferences
 
18.22 Setting Preferences Information
Screen capture
 
18.23 Setting Screen Capture
*1 Displayed when the automatic sailing option is attached.
*2 Displayed when the chart display option is attached.