JRC JMR-7210-6X - Page 607

18-5 Section 18 Setting up the Operation Mode
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
Setting Item Description of Setting Setting Value
Rain (rain/snow
clutter
adjustment)
Rotate the dial to set the mode to the
rain/snow clutter adjustment mode.
By clicking on the dial in adjustment
mode or clicking on the button next to
the slider, the mode can be switched
between manual (MAN) and
automatic (AUTO).
0 to 100
MAN: Manually removes rain/snow
clutters.
AUTO: Automatically removes
rain/snow clutters.
IR Set up the IR (Interference Removal)
function.
Off
IR Low
IR Middle
IR High
Target Enhance Set up the Target Enhance function. ENH Off
ENH Level1
ENH Level2
ENH Level3
Echo Process Set up the Echo Process function.
If the ship's heading cannot be
acquired, [PROC Off] is set.
PROC Off
3 Scan CORREL
4 Scan CORREL
5 Scan CORREL
Remain
Peak Hold