JRC JMR-7210-6X - Page 619

18-17 Section 18 Setting up the Operation Mode
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
Setting Item Description of Setting Setting Value
Association Turn On/Off the association setting. To enable: Select.
To disable: Clear.
Priority Select a priority of association target
display.
AIS
TT
Bearing Set up the bearing difference of the
association target.
0.0 to 9.9°
Range Set up the range difference of the
association target.
0 to 999 m
Course Set up the course difference of the
association target.
0 to 99°
Speed Set up the speed difference of the
association target.
0 to 99 kn
Applicable AIS Target Select a state of the AIS which will be
an association target. Only the AIS
target you specified will be an
association target.
Active
Active&Sleeping
TT/AIS Priority Select priority of association target
display.
AIS
TT
TT1/TT2 Priority Select priority of association target
display.
TT1
TT2