Section 18 Setting up the Operation Mode 18-16
If a solid state radar antenna is connected, the setting in [Stagger Trigger] will not be saved and it
will turn On (its check box is already selected) at each startup.
18.7 Setting Associations
Select [Association] in the classification pane.
Set TT/AIS in the setting dialog of the edit pane.
The AIS target and the tracking target are checked if they are identical and if so, an association symbol
is displayed for the targets. In this case, the AIS target symbol is automatically activated.
If you don't want to perform an identical target judgement, or if you want to display hidden
symbols, turn the association setting to Off.
RADAR ECDIS
To Next Page
Loading...
