Section 18 Setting up the Operation Mode 18-28
Setting Item Description of Setting Setting Value
Dead Band (On/Off) Set up On/Off of the dead band. This can be set up
even during automatic sailing.
To prevent yawing while navigation, it is necessary to
provide dead bands at both sides of the current
course.
If the own ship is positioned within the dead band
course, the course will be fixed at [Track Course]. For
more details, see the following drawing.
To enable: Select.
To disable: Clear.
Dead Band (setting
value)
Specify the dead band value. This can be set up even
during automatic sailing.
0.001 to 0.999 NM
Turning Gain
Display when the
TCS is
• Tokyo Keiki TCS
Category C
• Tokyo Keiki TCS
Category B (new
system)
Set up the turning gain. This can be set up even
during automatic sailing.
The turning gain represents how much the turning
radius will be changed according to the XTD when
changing the course.
You can select the turning gain in a range from 0 to 4.
• 0: Changes the course using the planned
radius without depending on the XTD during
course change.
• 1 to 4: Changes the turning radius according to the
XTD during course change. (1 is the
weakest gain and 4 is the strongest gain.)
0 to 4
Shortcut
Click on the following shortcut to display the related dialog box.
Shortcut Settings Dialog Box
Alert for Track Control [Track Control] dialog box
Set heading
(parallel to the route)
To Next Page
Loading...
