JRC NCR-333 - Page 112

Caution
¢Do not press and hold the ONLINE button and FEED button for 30 seconds or more, because it will
cause the DIP switches to reset and you will not be able to use the printer.
¢Be sure the thermal head is in the home position (at the left end) before turning off the power switch.
If the head is not in the home position for a long period, the print quality might be degraded.
• Loading the printer paper •
-&. Lightly push up on the front of the paper cover with your
thumb
and rotate it toward the back of the printer. (Close the
paper
and push down on it into place)
&. Loading the Paper
Push the edge of the paper into Insertion Slot.
The printing surface is the outside of the thermal paper roll.
The auto-loader catches paper and feeds it through the paper
cutter.
Confirm the ONLINE lamp is ON. If ONLINE lamp is OFF,
Push the ONLINE Switch.
4IJP If the paper feeds not straight and not smoothly, keep pressing the FEED button until
the paper feeds straight and smoothly.
10-2