I 6.3.4.5 External printer settings (PRINTER PROPERTY)
Serial port (RS-232C: MAINTENANCE/PRINTER) conditions can
be
set up when connecting external printer.
5.PRINTER PROPER Select ' and press the m
key.
Cursor moves to the right side
of
R:".
After setting up to "FLOW CONTROL", press
the~
key.
All settings are saved.
5.PRINTER
PROPERTY
DATA
OUT
DATA
FORMAT
BAUDRATE
FLOW
CONTROL
PRINT
DIRECTION
The explanations
of
each item are as follows;
(1) DATA OUT
MANUAL
ON
4800BPS
NONE
UPRIGHT
The data
out~t
method for printer is set
up.
Press the
~
l!]
key and select the following
items.
If the IENlj key
is
pressed, Cursor moves to the lower line.
OFF: The message is not outputted to the external printer.
AUTO: After receiving a message, the data is automatically outputted to the external printer.
MANUAL: The data
of
the selected message is outputted
to
the external printer.
(2) DATA FORMAT
The output data format is set up.
Press the ~ ~ key and select the following
items.
If the IENlj key
is
pressed, Cursor moves to the lower line.
ON:
The header and footer are added to a message text.
OFF: Only a message text is printed.
(The example
of
printing) I I
G--
518kHz NAVTEX MESSAGE
-~
Header
ZCZC
IA01
TEST MESSAGE
NNNN I
G--
END OF MESSAGE CER = 0.0%
-~
Footer
(3) BAUDRATE
Baudrate
,(Q!ts/sec)
is set up.
Press the
~ ~
key and select the following
items.
If the IENlj key
is
pressed, Cursor moves to the lower line.
Baudrate can be selected from "4800", "9600", and "38.4K." BPS.
(4) FLOW CONTROL
The flow control is set up.
Press
the~~
key and select the following
items.
If the
lEN]
key is pressed, Cursor moves to the lower
line.
NONE: The flow control is not performed.
HARD: The flow control is performed.
(5) PRINT DIRECTION
Print direction is set
up.
Press
the~~
key and select the following items. If the
lEN]
key is pressed, all settings are saved.
UPRIGHT: Upright printing (Set up when DPU-414 is connected.)
INVERT: Inverted printing (Set up when
NKG-91
or
NKG-901 is connected.)
The initial settings are as follows. Set up as follows when DPU-414 is connected.
If
NKG-91
or
NKG-901 is connected, please change PRINT DIRECTION into INVERT.
DATAOUT: MANUAL
DATA FORMAT: ON
BAUD RATE: 4800BPS
FLOW CONTROL: NONE
PRINT DIRECTION: UPRIGHT
6-46
To Next Page
Loading...
