I 6.3.5.4 Port monitor (PORT MONITOR)
Select . PORT MONITO , and press the
lEN]
key.
PORT MONITOR screen appears .
Select the port for monitoring. It can check whether data is normally outputted from the port.
In addition, the displayed data can be stored temporarily to be rechecked.
t'UKI
MUNIIUK
IDXI
1.
PORT
SELECTION:
OFF
2.PORT
LOG
B~
Fig.6-20 PORT MONITOR screen
Procudure
1.
Press the
~
~
key
in
order to select the items.
2. When the
lEN&
key is pressed, the menu screen
of
selected item appears.
Pressing the key can
display the same.
- When cursor is on the item
1,
cursor moves to the right side
of
":R
- When cursor is on the item
2,
the menu screen
of
item 2 appears.
-To
return to the MAINTENANCE screen, press
the~
key or
~
key.
-
If
the
~\is
~ressed
when cursor is on the right side
of
":R
of
the item 1, cursor returns
on
the item
1.
(il#te]~
G::15Jje]~!)
The outlines
of
menus are as follows;
1.
PORT SELECTION: Select the port to check the serial in/output data. (See
a.
The check
of
in/output data)
2.
PORT LOG: The data stored temporarily is displayed. (See
c.
Port log)
6-59
To Next Page
Loading...
