JRC NCR-333 - 9.5 PRINTER (DPU-414- Option)

9.2 NAVTEXANTENNA (NAW-333- Option)
I 9.2.1 Electrical characteristics
(1) Receiving frequency
(2)
Bandwidth
(3) Consumption current
(4)
Impedance
: 518kHz, 490kHz and 4209.5kHz
:
504kHz : ±20kHz
4209.5kHz : ±1OOkHz
: 6.5Vdc 23mA(Typ.)
:50 ohms
I 9.2.2 Environmental condition
(1) Equipment category
(2)
Operating temperature
(3) Humidity
resistance
: Exposure to weather
:
-25°C to +550C (IEC 60945)
:After 4 hours at + 40 o C, 93% RH, no abnormality
9.3 POWER SUPPLY UNIT (NBG-320- Option)
(1) Input voltage
(2) Output voltage
(3) Maximum current
:
90 - 132/180 - 242 Vac , 50/60Hz Single phase
: 21.6 - 31.2 Vdc (Back up power supply)
: 10.8-13.2 Vdc
5.85- 7.15 Vdc (for
External Printer)
: 1.5A(12V)
2.0A(6.5V)
9.4 POWER SUPPLY UNIT (NBG-319- Option)
(1) Input voltage
(2) Output voltage
(3) Maximum current
:
10.8- 31.2Vdc
:
10.8- 31.2Vdc
5.85-7.15 Vdc (for
External Printer)
: 1.5 A ( 12/24V)
2.0A(6.5V)
9.5 PRINTER (DPU-414- Option)
(1) Desktop type
(2) Power
voltage
(3) Maximum current
(4)
Total Character per line
: 6.5Vdc
:
2.0 A (In case character printing)
:40 character
9.6 PRINTER (NKG-91 -Option)
(1) Flush mount or wall mount type
(2) Power voltage : 5.0 - 8. 7 Vdc
(3)
Maximum current : 2.0 A (In case character printing)
( 4) Total Character per line :16 character
9-4