JRC NCR-333 - 6.3.4.2 CER setting (CER DISP.SETTING)

6.3 MAIN MEMU
Main menu displays menu items for jetting,
1
and maintenance, etc.
To display the Main menu, press the MENU key during operation.
Procedures
1. RX STATION
2.MESSAGE TYPE
3.DISPLAY
4.NAVTEX
5.MAINTENANCE
6.LANGUAGE: ENGLISH
[EXIT]
Fig.6-5 Main menu
1. Press the ~ ~ key to select the menu item.
. . vm
2. When the IEN1j key or the ~ key is pressed, the menu screen of selected item is displayed.
l Notes I
Previous screen is displayed when the I9BI key is pressed. (Such as message text display or message
list 1, etc).
The
outlines of menus are as follows;
1. RX STATION: Displays the menu for selecting receiving stations. (See 6.3.1)
2. MESSAGE TYPE: Displays the menu for selecting message types. (See 6.3.2)
3. DISPLAY: Displays the menu for setting the display unit. (See 6.3.3)
4. NAVTEX: Displays the menu for setting the NAVTEX receiver. (See 6.3.4)
5. MAINTENANCE: Displays the maintenance menu. (See 6.3.5)
6. LANGUAGE: Selects the menu display language. (See 6.3.6)
[EXIT]: Return to the previous screen (Such as message text display or message list 1,
etc.)
6-25