1&.3.1.4
Manual receiving station selection (MANUAL MODE SETTING)
To display MANUAL MODE SETTING screen, select
(6.3.5).
.MANUAL
MODE SETTING
Select
the receiving station
of
each channel. There is no setup
of
NAVAREA.
IBXI
from
RX
STATION menu
Fig.6-8 The receiving station
selection screen (Manual mode setting)
The
items
of
the receiving station selection screen (manual mode) are as follows;
-FREQUENCY:
Select the channel (RX1 (518k), RX2 (490k), RX3 (4209.5k)).
- D SELECT ALL: Select all the stations from A to
Z.
I:
A message is received.
O:
A message is not received.
- Receiving station
A-
Z:
Select receiving stations from A to Z
When this screen is displayed,
the
receiving station
of
RX1 is displayed first.
I
a.
Select
receiving stations
Start with selection
of
"FREQUENCY".
Carry
out
the procedure from section 3)
to
5)
of
p.6-29 "a. Select receiving stations"
I b. Cancel settings
Carry
out
"b. Cancel settingsn
of
p.6-30.
I c. Set up the next channel
Carry
out
the procedure from section 1)
to
3)
of
p.6-30 "c. Set up the
next
channel (or NAVAREA)".
I d. Save
(or
Clear) settings
Carry
out
the procedure from section 1)
to
4)
of
p.6-31 "d. Save
(or
Clear) settings".
6-32
To Next Page
Loading...
