I 6.3.1.1 Receiving
mode
setting
(RX MODE)
The automatic select mode and the manual select mode
for
RX
station:
- AUTO: Automatic select mode
When
normal GPS position data is inputted, the position and NAVAREA
of
a ship are automatically
specified, and the message
of
the receiving station in the NAVAREA is received.
(The·~"
mark is displayed on the status bar.)
"AUTO" can be operated only when the GPS data is inputted.
- MANUAL:
Manual select mode
Regardless
of
the NAVAREA, messages are received according
to
the station selection settings
of
each channel.
[Notes
I
The information
of
code number "00" is always received when the stations are selected, displayed
and stored automatically regardless
of
the setting.
(Refer
to
"6.2.7.1 Message
text~.)
I 6.3.1.2 Receiving channel setting (OPERATING FREQ.)
A receiving channel selection
Press the
~ ~
key and select the following items:
-
RX1
(518kHz)/
RX2
(490kHz)/
RX3 (4209.5 kHz)
-
RX1/
RX2
-
RX1/
RX3
RX1
(518kHz) is always selected.
6-27
To Next Page
Loading...
