JRC NCR-333 - 9.1.6 Supported Interface sentences

I 6.3.5.5 Software version (SOFTWARE VERSION)
When MAINTENANCE menu screen is ~isijlayed, the present software version is displayed on the item 5.
To
display the MAIN MENU, press the L key.
MANINTFNANr!F
l.SELF DIAGNOSIS
2.BAM ALERT
3.STATUS
4. PORT MONITOR
5.SOFTWARE VERSION
- PROGRAM 04.00
- LANGUAGE 01.00
- OPTION
~XI
Bml
IMANlNI
l.SELF DIAGNOSIS
2.NAVTEX ALARM
3.STATUS
4. PORT MONITOR
5.SOFTWARE VERSION
-PROGRAM 04.00
-LANGUAGE 01.00
- OPTION
&XI
(When connected to the BAM) (When not connected to the BAM)
Fig.6-21 Maintenance manu screen
The
explanations of each item are as follows;
-PROGRAM: Program version is displayed.
-LANGUAGE: Langage version is displayed.
- OPTION: Option langage version is displayed.
When the option language is not installed, , _____ M is displayed.
When you do not connect to the BAM, the notation of "2.BAM ALERT" is "2.NAVTEX ALARM".
1&.3.7 The display language setting (LANGUAGE)
To select the display language, select [ijjlfr1~@1MC13 from MAIN MENU (6.3).
Press
the~~ key and select the language. When the IENlj key is pressed, menu screens are displayed in
the
selected language.
When the language data is already installed, the language name is displayed as follows.
-FRENCH
- PORTUGUESE
-ITALIAN
-SPANISH
When the option language is already installed, the option language name is displayed.
The initial setting is "ENGLISW.
In case the language setting is selected except for "ENGLISW, the character size is only medium.
6-62