10.2 PRINTER (NKG-91)
Lt.
CAUTION
The thermal head
of
the NKG-91 printer may be very hot after printing. Do not touch the
thermal head
of
the printer. Make sure that the thermal head is cool before replacing the
paper
or
cleaning the thermal head.
The paper used
in
the NKG-91 printer is heat sensitive. Take the following precautions when
using this paper.
• Store the paper away from heat, humidity,
or
heat sources.
• Do not rub the paper with any hard objects.
• Do not place the paper near organic solvents.
•
Do not allow the paper to come
in
contact with polyvinyl chloride film, erasers,
or
adhesive
tape for
long periods
of
time.
• Keep the paper away from freshly copied diazo type
or
wet process copy paper.
1
2
3
• Loading the printer paper •
t
..
Press
the
paper cover
open
button.
The paper cover will open.
Insert
the
paper
as
shown
in
the
right
figure.
Position the paper such that the leading edge extends outside
the printer, and press both sides
of
the paper cover to close
it.
1.
Paper cover open button
2.
Paper cutter
3.
Paper cover
-·
The printer will be turned on and off simultaneously with the equipment.
10-3
To Next Page
Loading...
