1.
GENERAL
1.1
Outlines
The NAVTEX NCR-333 function receives and displays the various types
of
information broadcast
at frequencies
of
518kHz,
490kHz
and 4209.5 kHz, such as: navigational warning, meteorological
warning, search and rescue information, and other types
of
information. NCR-333 also provides
the function that
selects information type and coast station for intended uses.
1.2 Features
e Receiving NAVTEX broadcasts
NCR-333 receives NAVTEX broadcasts
automatically on 518 kHz, 490 kHz, and 4209.5 kHz.
e Large screen allows comfortable visibility
NCR-333 has a
5.
7 -inch LCD screen display with clear visibility.
It also
provides three different character sizes
of
display, and can be selected at your convenience.
e Message saving function
NCR-333 can store up to
200 message identification codes for 70 hours. Moreover, the stored
message
of
each channel can be saved up to 50 messages permanently.
e Automatically receiving station setting function
NCR-333 can
select receiving stations automatically on GPS position data is valid.
e Permanent storage
of
data settings
NCR-333 can
set
and store the message type and seashore station that receive to internal memory.
The data, therefore, does not need to be re-set, even after power has been turned off.
e Dual voltage supply input
NCR-333 can be used on wither
24
Voc
or
12 Voc vessels.
e Self-diagnosis Function
NCR-333 has automatic
self-diagnosis function. This function allows easy maintenance and high
system
reliability.
e Connection to external equipment
NCR-333 can be used with the JRC
Total Navigator (ECDIS) and external serial printers.
1-1
To Next Page
Loading...
