1&.3.5.3 Setting status
of
the NAVTEX Receiver (STATUS)
To
display STATUS screen, select
O.it-iiij#l
from MAINTENANCE menu (6.3.5).
The setting information
of NCR-333
is
displayed on the screen.
I'DX I
: X I
518kHZ
DISABLED
STATION:
A--D-----J----OPQR--------
490kHZ
DISABLED
STATION:
---------J-------------XYZ
4209.5kHZ
DISABLED
STATION:
---D----------OPQR--------
518kHZ
DISABLED
MESSAGE
TYPE:
-----EF-----MNOPQR--------
490kHZ
DISABLED
MESSAGE
TYPE:
-----EF-----MNOPQR--------
4209.5kHZ
DISABLED
MESSAGE
TYPE:
-----EF-----MNOPQR--------
N
OF
STORED
MSG:
94:
52:
22
N
OF
SAVE
MSG:
39:
21:
5
T
Fig.6-19 STATUS screen
The setting information
of
each items are as follows;
-518
(490, 4209.5) kHz DISABLED STATION:
The alphabet
of
stations which does not receive is displayed.
- 518 (490, 4209.5) kHz DISABLED MESSAGE TYPE:
The alphabet
of
message type which does not receive is displayed.
- N
OF
STORED MSG: The number
of
the stored messages is displayed. Starting from the left, 518k,
490k, and 4209.5 kHz are displayed. When the number of the stored messages
is the maximum, it is
displayed as "FULL".
- N
OF
SAVE MSG: The number
of
the saved messages is displayed. Starting from the left, 518k,
490k, and 4209.5 kHz are displayed. When the number
of
the saved messages is
the maximum, it is
displayed as "FULL".
- INS MSG OUTPUT SETTING:
The alphabet
of
stations and msg type which does not output ins is displayed.
-PRINT
MSG OUTPUT SETTING:
The alphabet
of
stations and msg type which does not output printer is
displayed.
-To
return to
the
MAINTENANCE screen, press
the~
key
or~
key.
:
XI
518kHZ
DISABLED
STATION:
A--0---J--OPQR---
490kHZ
DISABLED
STATION:
---------------YZ
4209.5
*
--D
518kHZ PE: [PRINT
OUT]
490kHZ
[
DATA
OUT]
[CANCEL]
PE:
<DXI
4209.5
TYPE:
----EF---MNOPQR--------
N
OF
STORED
MSG:
94:
52:
100
~
OF
SAVE
MSG:
39:
40:FULL
BWil
6-58
Press the 8 key in order
to
display the sub screen.
To
print the setting status to the external printer, select
the "[PRINT
ouTr.
and press the IENlj key.
To
stop printing, press the
g]l
key while printing.
To
output the status data
to
serial ports, select the "[DATA
ouTr,
and press the IENlj
k~
To
stop outputting press the
IQ!:.Bl
key while data
outputting.
To
return to the STATUS screen, select the "[CANCEL]•
and press the IENlj key.
To Next Page
Loading...
