I
a.
The
check
of
In/output data (PORT SELECTION)
Procudure
1) Select 1.PORT SELECTION , and press the
lEN]
key.
Cursor moves
to
the right side
of":".
2) Press the
~
~
key and select the following items;
OFF: The monitoring
of
each port does not carry out.
GPS IN: Input data
of
the GPS port
DISP IN: Input data
of
the DISP (Option) port
DISP OUT: Output data
of
the DISP (Option) port
3)
Example
-Select
the "GPS
IW,
and press the IENlj key.
PORT MONITOR menu screen changes to the data display screen.
I"OKI MUNI
IOK
1.
PORT
MONITOR:
2.
PORT
LOG
[Notes 1
(DXI
[Cj:;c;."WI~I
El(!lll
4.2s1:E.oo.o:
158.
:o2o9o3.oo.
:w.o*2
D
$GPGLL,3541.273,N,
13934.251,E,0126
01.0
$GPGGA,012602.00,3541.273,N,
13934.
251.E.2.08,01.0,+0050,M,+039,M.05,
.
0686*5C
$PRMC,012601.00,A,3541.273,N,
1393
4.251,E,OO.O,
158.,020903,00.
,W,D*2
D
$GPGLL,3541.273,N,
13934.251,E,0126
01.0
$GPGGA,012602.00,3541.273,N,
13934.
251.E.2.08,01.0,+0050,M.+039,M.05,
.
0686*5C
El'
-When
neither the GPS receiver
nor
MPD is connected to the port of •GPS IN" and
•oiSP
IN", nothing is
displayed on the data display screen.
I b. Store the displaying data temporarily
Procudure
1) Press the 8
key.
The sub screen appears.
2)
Select the "[START]", and press the IENlj
key.
Storing
of
the displaying data is started.
During storing, the
following is displayed on the screen
title.
" NOW LOGGING ...
II
-When
the
IMENUI.
IDISPI
or
IUSERI
key is pressed,
storing
of
the displaying data is stopped.
-Data
is recordable to two screens.
-Data
is stored until the power is turned off.
3) For canceling, select the "[STOP]" and press the IENlj
key.
The sub screen is closed, and storing
of
the displaying data is stopped.
6-60
To Next Page
Loading...
