I 6.3.4.6 External equipment message
output
settings (INS
MSG
OUTPUT SETTING)
INS port (DATA OUT) message output conditions can be set up when connecting external equipment.
..
vm
STATION
SELECT
ALL
518k:
~B-DEFGHIJKLMNOPQRSTUVWXYZ
490k:
A-CDEFGHIJKLMNOPQRSTUVWXYZ
4.2M:
-BCDEFGHIJKLMNOPQRSTUVWXYZ
MSG
TYPE
SELECT
ALL
518k:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
490k:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
4.2M:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
The items
of
the station and message type selection screen are followings;
-Station A to Z and message type A
to
Z
of
outputted messages via INS port.
"SELECT ALL" : Select all the station
or
msg type from A to Z.
"N
to
"Z~
display : Messages are outputted via INS port .
..
_.display
:Messages are not outputted via INS port.
[Notes]~----------------------------------------------------------~
Navigational warning [A], Meteorological warning [8], Search and rescue information/piracy and armed
robbery [D],
Navigational warning [L] are obliged
to
receive a message. These message types setting
cannot be changed.
I
a.
Select stations and message type
Press
the~~~
~key
to
select station and messge type for setting.
-Pressing the ENT key switches
alternately
b~tween
"(A-Z)
"and·-".
- Select the "SELECT
ALL~
and press the
EN
key, settings changes
to
all.
I b. Cancel settings
When
the~
IMENUV
~
IUSERI
key is pressed while setting up ·a. Select receiving stations and
message type", the information screen (the sub screen) as shown
in
the following figure is displayed.
Select
"0~
or"CANCEL".
OK: Canceling
the receiving station settings, and the screen changes according to the pressed
key.
CANCEL: The information screen is
closed. Continue the station and message type settings.
>~<INS
MSG
SET*
EX
IT
WITHOUT
SAVING.
ARE
YOU
SURE?
(SAVE:PRESS
'*'KEY)
00JM
[CANCEL]
6-47
To Next Page
Loading...
