I 6.3.4. 7 External
printer
message
output
settings
(PRINTER MSG OUTPUT SETTING)
Serial port (RS-232C: MAINTENANCE/PRINTER) message output conditions can be
set
up
when connecting
external printer.
The
external printer message output settings can be operated when
the
DATA
OUT
of
5.PRINTER
PROPERTY
is
MAUTO"
setting.
STATION
SELECT
ALL
518k:
~B-DEFGHIJKLMNOPQRSTUVWXYZ
490k:
A-CDEFGHIJKLMNOPQRSTUVWXYZ
4.2M:
-BCDEFGHIJKLMNOPQRSTUVWXYZ
MSG
TYPE
SELECT
ALL
518k:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
490k:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
4.2M:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
EIU
The items
of
the receiving station and message type selection screen are followings;
- Station A
to
Z and message type A
to
Z
of
outputted messages
via
printer port.
"SELECT ALL" : Select all the station
or
msg type from A
to
Z.
"N
to
·z·
display : Messages are outputted
via
printer port.
"-M
display
:Messages
are
not
outputted
via
printer port.
[Notes]~----------------------------------------------------------~
Navigational warning [A], Meteorological warning
[B],
Search
and
rescue information/piracy and armed
robbery
[D],
Navigational warning [L]
are
obliged
to
receive a message. These message types setting
cannot
be
changed.
I
a.
Select stations and message type
Carry
out
"a. Select stations and message type •
of
p.S-43.
I b. Cancel settings
Carry
out
"b. Cancel settings•
of
p.S-43.
I c. Save
(or
Clear) settings
Carry
out
the
procedure from section 1)
to
4)
of
p.S-44 "c. Save (or Clear) settings".
6-49
To Next Page
Loading...
