I b. The
diagnosis
of
LCD panel (LCD DIAGNOSIS)
Procudure
1) Select 2.LCD DIAGNOSIS
, and press the
lEN]
key.
Cursor moves to the right side
of
R:".
2) Press the
~
~
key and select the following items;
START: Diagnosis is started.
CANCEL: Diagnosis is canceled, and cursor returns to .LCD DIAGNOSIS
3) Select the "START•, and press the IENlj
key.
This diagnosis blinks the viewing area every 2 seconds. (White-> Black-> White->
...
)
I c.
Self
diagnosis
log
(SELF DIAGNOSIS LOG)
Procudure
1) Select , and press the IENll
key.
SELF DIAGNOSIS LOG screen appears.
3.SELF DIAGNOSIS LOG
The newest result is displayed on this screen.
2) To
display the next old result, press
the~
key. (Up to last 10 results)
The diagnosed time is displayed when external GPS receiver is connected.
"--/-/----:--"is
displayed when time is not able to be acquired. (External GPS receiver is not connected.)
CDXI
•
RESULT
29/06/05
12:34
ROM[l]
[2]
NG
RAM
GOOD
SI0[1]
[2] [3]
NG
PS
GOOD
ANTENNA
CHECK
GOOD
518KHZ
OVER
ALL
TEST
GOOD
490KHZ
OVER
ALL
TEST
GOOD
4209.5KHZ
OVER
ALL
TEST
GOOD
To
print a result to the external printer, press the 8 key
in
order to display the sub screen.
Select the •[PRINT OUT]", and press the IENll
key.
Printing is started.
To
stop printing, press the
~
key while printing.
To
return to the SELF DIAGNOSIS screen, select the
·[CANCELr
and press the IENll key.
6-53
To Next Page
Loading...
