a.
ALERT
HISTORY
This
screen displays a history
of
alarms which
occur
while
the
power is on. It displays
the
alarm history from
the
most
recent
one
maximum
20
lines.
To return
to
the
BAM ALERT screen, press
the~
key
or
~
key.
General
fai
ure
4.18/12/31
23
59
3079,2,C,B,N
General
fai
ure
5.19/01/05
06
15
3079,
1,C,B,V
Bui
It
in
se
f
test
failure
6.19/01/05
06
15
3079,2,C,B,V
General
fai
ure
7.19/01/05
06
15
3079,3,C.B.V
Antenna
inoperative
8.19/01/05
06:15
3079,
1,C,B,V
Bui
It
in
self
test
failure
9.19/01/05
06:15
3079,2,C,B,V
Genera
I
fa
i I
ure
10.19/01/05
06:15
3079,
1,C,B,V
Antenna
inoperative
Fig.6-16 ALERT HISTORY screen
Proceudure
1) To display the next old result, press
the~
key.
-
"T"
mark is displayed
on
the
bottom line when
the
alert history screen is able to be scrolled downward.
".A"
mark is
d~layed
on
the top
line when the alert history screen is able
to
be scrolled upward.
- Press the
~
~
key
and scroll the viewing area.
The
time
of
an alarm occurred and is restored is displayed when external
GPS
receiver is connected.
"--1-1--
--:--"is
displayed when time is
not
able to be acquired. (External GPS receiver is
not
connected.)
The
display
of
the
alert is described.
Alert message:
3079.2,
~.
~.
Y...
General failure
1 2 3 4 5
1: The alert ID (refer
to
the
following table)
2: The priority (defined by
the
BAM)
3: The category (defined
by
the BAM)
4: The
alert
condition->
"V": Alarm is occurring ,•N": Healthy status
5: Alert's description text (refer
to
the
following table)
The list
of
BAM alert
Alert ID
Alert's description text
Priority
Cateaorv
The
contents of unusual detection
3079,1
Built
in
self test failure
c B
Self diagnosis failure
3079,2
General failure
c B
Unusual detection at the power supply part
3079,3
Antenna inoperative
c B
Unusual detection
of
antenna power supply
3079,4
Flash
memory error
c B
The
data
in
a memory is
broken.
3079,5
Rx unit
modem
error
c B
Unusual detection at the
modem
part
3079,6
Printer error
c B
External printer has malfunction
3116,1
Receiver1
(518kHz) malfunction
c B
Unusual detection at the
RX1
(518kHz)
3116,2
Receiver2(490kHz)
malfunction
c B
Unusual detection at the RX2(490kHz)
3116,3
Receiver3(4.2MHz)
malfunction
c B
Unusual detection at the RX3(4.2MHz)
2)
To
print the BAM
ALERT
to
the
external printer, press the 8 key in
order
to
display the
sub
screen.
Select the "[PRINT OUT]", and press
theiENlj
key. Printing is started.
[PRINT OUT]: Printing is started.
[CANCEL]: Diagnosis is canceled, and the sub screen is closed.
6-55
To Next Page
Loading...
