– 105 –
①
Selecting the function restriction setting function
(3) Setting the key-lock and the password
Specic key operation can be prohibited to disable change in data by enabling the key-lock.
Furthermore, change in the status of the key-lock between enable/disable can be prohibited by setting a
four-digit password.
1. Keep
❾
held pressed for six
seconds on the sewing screen to dis-
play the mode screen.
2. Select "14 Functn restrict settng" by
pressing
❷
. Then, press
❺
to display the function restric-
tion setting management screen.
<Mode screen>
❷
❺
②
Setting up a password
1. Select "01 Password setting" by
pressing
❶
. Then, press
❺
to display the Password setting
screen. (Initially, four gures "0000" is
displayed.)
2. Select what number of the four g-
ures to edit by pressing
❶
.
Then, input a new gure by pressing
❷
. The "+/−" is displayed
at the top and bottom of the selected
gure.)
<Password setting screen>
❶ ❷
❺
3. Only the selected gure can be deleted by pressing
❽
. All gures can be returned to "0000"
by keeping it held pressed for one second.
4. Press
❺
to conrm the four gure as a password and return the current screen to the function
restriction setting management screen.
* The password status can be returned to "not set" state by keeping
❽
held pressed for three
seconds.
❾
❽
To Next Page
Loading...
