JUKI DDL-9000C-S - Page 110

– 106 –
③
Setting the key-lock
1. Select "02 Fnction-limit change" by
pressing
❶
on the function
restriction setting management screen.
Then, press
❺
to display the key-
lock setting screen.
2. Press
❺
to display the key-lock
item setting screen.
3. Select the function by pressing
❶
. Then, set enable/disable
of the key-lock on the selected function
by pressing
❷
.
4. Press
❻
to conrm the data and
return the current screen to the key-
lock item setting screen.
<Key-lock setting screen>
❶
❺
<Key-lock item setting screen>
❶ ❷
❻
Setting on the key-lock setting
screen
Setting on the key-lock item
setting screen (key-lock setting
on a function-by-function basis)
Key-lock status
Key-lock is enabled Function 1 : Key-lock is enabled Key-lock is enabled
Function 2 : Key-lock is disabled Key-lock is disabled
… …
Key-lock is disabled Function 1 : Key-lock is enabled Key-lock is disabled
Function 2 : Key-lock is disabled Key-lock is disabled
… …
* Be aware that the key-lock will be disabled regardless of how the key-lock items have been set on
the key-lock item setting screen, once the key-lock is set to disable on the key-lock setting screen as
shown in the table below.
5. Set the key-lock to enable by pressing
❷
on the key-lock setting screen.
6. Press
❻
to conrm the data and return the current screen to the function restriction setting
management screen.