JUKI DLN-9010 - Contents; Table of Contents

CONTENTS
BEFORE OPERATION 1
1. SPECIFICATIONS 3
2. INSTALLATION 5
3. ADJUSTING THE HEIGHT OF THE KNEE LIFTER 7
4. INSTALLING THE THREAD STAND 9
5. LUBRICATION 9
6. ADJUSTING THE AMOUNT OF OIL IN THE HOOK 11
7. ADJUSTING THE AMOUNT OF OIL(OILSPLASHES) IN THE HOOK 13
8. ATTACHING THE NEEDLE 17
9. SETTING THE BOBBIN INTO THE BOBBIN CASE 18
10. ADJUSTING THE STITCH LENGTH 19
11. PRESSER FOOT PRESSURE 20
12. THREADING THE MACHINE HEAD 21
13. WINDING THE BOBBIN THREAD 22
14. THREAD TENSION 25
15. THREAD TAKE-UP SPRING 26
16. ADJUSTING THE THREAD TAKE-UP STROKE 27
17. ADJUSTING THE NEEDLE STOP POSITION 28
18. PEDAL PRESSURE AND PEDAL STROKE 30
19. ADJUSTMENT OF THE PEDAL 32
20. PEDAL OPERATION 33
21. ONE-TOUCH TYPE REVERSE FEED STITCHING MECHANISM 36
22. WIPER (DLN-901 OSA-WB) 40
23. NEEDLE-TO-HOOK RELATIONSHIP 42
24. COUNTER KNIFE 44
25. HEIGHT AND TILT OF THE FEED DOG 45
26. ADJUSTING THE FEED TIMING 48
27. THREAD TENSION RELEASE RELEASING MECHANISM.... 50
28. MICRO-LIFTING MECHANISM OF THE PRESSER FOOT 52
29. ADJUSTING THE HEIGHT OF THE PRESSER FOOT 56
30. ADJUSTING STITCH WIDTH 57
31. ALTERNATE CHANGING OVER PROCEDURE BETWEEN THE NEEDLE FEED
AND THE BOTTOM FEED 58
XIX
From the library of: Superior Sewing Machine & Supply LLC