EasyManuals Logo

JUKI PLC-2700 Series User Manual

JUKI PLC-2700 Series
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
– 18 –
󱀁
󱀂
󰿿
󱤪
󱀀
(3) Adjusting the oil quantity in the hook
(2) Cleaning the oil lter
Be sure to clean up the oil reservoir of the oil pan and the lter case approximately once a month.
If the lter is clogged with soil, lubrication fails resulting in trouble.
A sheet of paper
B
A
󱀀󱀂
󰿿󱀁
1) Loosen fastening plate 󰿿 on the back-ow side. Remove oil lter joint (asm.) 󱀀 on the back-ow side.
2) Clean up lters 󱀁, 󱀂 and 󱀃 and oil reservoir 󱀄 of the oil pan.
Right hook
1) Loosen nut 󰿿 and turn oil amount adjustment
screw 󱀀 to adjust the amount of oil in the right
hook.
Turning the screw clockwise A will decrease the
amount of oil in the hook or counterclockwise B
will increase it.
Oil quantity adjusting screw 󱤪 is xed. Do
not adjust it.
2) Loosen nut 󱀁 and turn oil amount adjustment
screw 󱀂 to adjust the amount of oil in the left
hook.
Turning the screw clockwise A will decrease the
amount of oil in the hook or counterclockwise B
will increase it.
3) The appropriate amount of oil, when a sheet of
paper is placed near the periphery of the hook,
is to such an extent that splashes of oil from the
hook appear in approximately ve seconds as
shown in the gure on the left.
Left hook
󱀁
󰿿
󱀀
󱀃
󱀂
󱀄

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JUKI PLC-2700 Series and is the answer not in the manual?

JUKI PLC-2700 Series Specifications

General IconGeneral
BrandJUKI
ModelPLC-2700 Series
CategorySewing Machine
LanguageEnglish

Related product manuals