atm-service
Syntax atm-service (cbr | nrtvbr| rtvbr| ubr);
Hierarchy Level [edit class-of-service traffic-control-profiles traffic-control-profile-name],
[edit firewall atm-policer atm-policer-name]
Release Information Statement introduced in Junos OS Release 12.2 on ACX Series routers.
Description (ACX Series routers) Configure the ATM service category on ATM IMA pseudowire
interfaces to define bandwidth shaping and policing.
• For shaping at the [edit class-of-service traffic-control-profiles
traffic-control-profile-name] hierarchy level, configure the ATM service category on the
ATM IMA pseudowire for shaping and utilization. Shaping is based on the ATM service
categories—cbr, nrtvbr, and rtvbr.
• For policing at the [edit firewall atm-policer atm-policer-name] hierarchy level, configure
the ATM IMA pseudowire to control the number of cells that fall within the defined
parameters. Policing is based on the ATM service categories—cbr, rtvbr, nrtvbr, and
ubr.
Options cbr—Use the constant bit rate.
nrtvbr—Use the nonreal-time variable bit rate.
rtvbr—Use the real-time variable bit rate.
ubr—Use the unspecified bit rate.
Required Privilege
Level
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Understanding CoS on ATM IMA Pseudowire Interfaces Overview on page 895
• Configuring Policing on an ATM IMA Pseudowire on page 912
• Configuring Shaping on an ATM IMA Pseudowire on page 901
• show class-of-service traffic-control-profile
1439Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements