input-relay (Alarm Relay Output Port)
Syntax input-relay input-relay;
Hierarchy Level [edit chassis alarm relay output port port-number ]
Release Information Statement introduced in Junos OS Release 12.3.
Description Configure the output relay alarm port to respond when the configured input relay port is
triggered.
The remaining statements are explained separately. See CLI Explorer.
Options input-relay—Input port number configured at the [edit chassis alarm relay input port
port-number] hierarchy level. Input relay alarm port numbers are 0 through 3.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• User-Defined Alarm Relay Overview on page 158
• show chassis craft-interface on page 1865
• show chassis alarms on page 1845
1567Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
