no-partition
Syntax no-partition interface-type (e1 | t1);
Hierarchy Level [edit interfaces ce1-fpc/pic/port],
[edit interfaces ct1-fpc/pic/port]
Release Information Statement introduced in Junos OS Release 12.2 for ACX Series routers.
Description For built-in channelized T1 and E1 MICs only, configure the channelized interface (ce1 or
ct1) with one full E1 or T1 interface on which you can configure other parameters. The
channelized interface is an interface on which you cannot configure parameters directly.
You must configure a child E1 or T1 interface on which you can configure parameters.
Options The option used must correspond to the physical interface type:
e1—E1 interface type.
t1—T1 interface type.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• SAToP Emulation on T1 and E1 Interfaces Overview on page 110
1639Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
