profiles (RFC 2544 Benchmarking)
Syntax profiles {
test-profile profile-name {
test-type (throughput | latency | frame-loss | back-back-frames);
packet-size bytes;
step-percent percent;
bandwidth-kbps kpbs;
}
}
Hierarchy Level [edit services rpm rfc2544-benchmarking]
Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Description Configure the test profile to specify attributes, such as the period for the test and the
type of test to be performed, for the RFC 2544-based benchmarking test. The test profile
is referenced in the test interface to perform a specific type of benchmarking test and
compute statistics to describe the performance characteristics of a network
interconnecting device.
Options profiles—Define the test profile for the RFC 2544-based benchmarking test to examine
and analyze the performance characteristics of a network interconnecting device.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• RFC 2544-Based Benchmarking Tests Overview on page 1335
• Configuring RFC 2544-Based Benchmarking Tests on page 1341
• rfc2544-benchmarking on page 1698
Copyright © 2017, Juniper Networks, Inc.1678
ACX Series Universal Access Router Configuration Guide