Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Support of the Path Computation Element Protocol for RSVP-TE Overview on page 692
• Example: Configuring the Path Computation Element Protocol for MPLS RSVP-TE on
page 707
• Example: Configuring Path Computation Element Protocol for MPLS RSVP-TE with
Support of PCE-Initiated LSPs on page 721
• Example: Configuring Path Computation Element Protocol for MPLS RSVP-TE with
Support for PCE-Controlled Point-to-Multipoint LSPs on page 735
pce-group (PCE)
Syntax pce-group pce-group-name;
Hierarchy Level [edit protocols pcep pce pce-id]
Release Information Statement introduced in Junos OS Release 12.3.
Support for PTX Series added in Junos OS Release 14.2.
Support for QFX10000 switches added in Junos OS Release 16.1R3.
Support for ACX Series added in Junos OS Release 17.1R1.
Description Specify the Path Computation Element (PCE) group to which the configured PCE belongs.
Options pce-group-name—Name of the PCE group.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• pce on page 1655
Copyright © 2017, Juniper Networks, Inc.1658
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
