Related
Documentation
Understanding IGMP Snooping on page 473•
• Host-Side Interfaces and IGMP Snooping Proxy Mode on page 477
• Multicast-Router Interfaces and IGMP Snooping Proxy Mode on page 476
Configuring IGMP Snooping Trace Operations
Tracing operations record detailed messages about the operation of routing protocols,
such as the various types of routing protocol packets sent and received, and routing policy
actions. You can specify which trace operations are logged by including specific tracing
flags. The following table describes the flags that you can include.
DescriptionFlag
Trace all operations.all
Trace notifications.client-notification
Trace general flow.general
Trace group operations.group
Trace host notifications.host-notification
Trace leave group messages (IGMPv2 only).leave
Trace normal events.normal
Trace all IGMP packets.packets
Trace policy processing.policy
Trace IGMP membership query messages.query
Trace membership report messages.report
Trace routing information.route
Trace state transitions.state
Trace routing protocol task processing.task
Trace timer processing.timer
You can configure tracing operations for IGMP snooping globally or in a routing instance.
The following example shows the global configuration.
Copyright © 2017, Juniper Networks, Inc.486
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
