To Next Page

To Previous Page

The physical topology configuration trap interval determines the period for which trap

notifications are sent to the SNMP Master Agent when changes occur in the global

physical topology statistics. This capability is disabled by default. The allowable range

is from 0 (disabled) through 3600 seconds. The LLDP agent sends traps to the SNMP

Master Agent if this interval has a value greater than 0 and there is any change during

the lldp-configuration-notification-interval trap interval. You adjust this parameter by

including the ptopo-configuration-trap-interval statement at the [edit protocols lldp]

hierarchy level.

By default, LLDP generates the SNMP index of the interface for the port ID Type, Length,

and Value (TLV). Starting with Junos OS Release 12.3R1, you can generate the interface

name as the port ID TLV by including the interface-name statement at the [edit protocols

lldp port-id-subtype] hierarchy level. When configure the interface-name, statement on

the remote LLDP neighbor, the show lldp neighbors command displays the interface

name in the Port ID field rather than the SNMP index of the interface, which is displayed

by default. If you change the default behavior of generating the SNMP index of the

interface as the Port ID TLV, you can reenable the default behavior by including the

locally-assigned statement at the [edit protocols lldp port-id-subtype hierarchy level.

Documentation

LLDP Overview on page 431•

• LLDP Operational Mode Commands on page 434

LLDP Operational Mode Commands

Table 40 on page 434 summarizes the command-line interface (CLI) commands you can

use to monitor and troubleshoot the Link Layer Discovery Protocol (LLDP) protocol.

Commands are listed in alphabetical order.

Table 40: LLDP Operational Mode Commands

CommandTask

clear lldp neighborsClear LLDP neighbor information.

clear lldp statisticsClear LLDP statistics.

show lldpDisplay basic LLDP information.

show lldp local-informationDisplay LLDP local information.

show lldp neighborsDisplay LLDP neighbor information.

show lldp remote-global-statisticsDisplay LLDP remote global statistics.

show lldp statisticsDisplay LLDP statistics.

Documentation

• LLDP Overview on page 431

ACX Series Universal Access Router Configuration Guide

Juniper ACX1000 Configuration Guide

Other manuals for Juniper ACX1000