minimum-links
Syntax minimum-links number;
Hierarchy Level [edit interfaces ls-fpc/pic/port:channel mlfr-uni-nni-bundle-options],
[edit interfaces (ls-fpc/pic/port | ml-fpc/pic/port) unit logical-unit-number],
[edit logical-systems logical-system-name interfaces ls-fpc/pic/port:channel
mlfr-uni-nni-bundle-options],
[edit logical-systems logical-system-name interfaces (ls-fpc/pic/port | ml-fpc/pic/port) unit
logical-unit-number]
Release Information Statement introduced before Junos OS Release 7.4.
Description For multilink or link services interfaces only, set the minimum number of links that must
be up for the bundle to be labeled up. A member link is considered up when the PPP Link
Control Protocol (LCP) phase transitions to open state.
The minimum-links value should be identical on both ends of the bundle.
Options number—Number of links.
Range: 1 through 8
Default: 1
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Configuring the Minimum Number of Active Links on Multilink and Link Services Logical
Interfaces on page 515
1617Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
