•
state—Trace all state transitions.
•
timer—Trace all timer events.
Related
Documentation
Understanding VRRP on ACX Series Routers on page 651•
• Configuring Basic VRRP Support on page 653
• Configuring the Advertisement Interval for the VRRP Master Router on page 655
• Configuring a Backup Router to Preempt the Master Router on page 656
• Modifying the Preemption Hold-Time Value on page 657
• Configuring Asymmetric Hold Time for VRRP Routers on page 657
• Configuring an Interface to Accept Packets Destined for the Virtual IP Address on
page 658
• Configuring a Logical Interface to Be Tracked on page 659
• Configuring a Route to Be Tracked on page 661
• Configuring the Silent Period on page 663
• Example: Configuring VRRP on page 665
Example: Configuring VRRP
Configure one master (Router A) and one backup (Router B) router running VRRP. The
address configured in the virtual-address statements differs from the addresses configured
in the address statements. When you configure multiple VRRP groups on an interface,
you configure one to be the master virtual router for that group.
On Router A [edit interfaces]
ge-0/0/0 {
unit 0 {
family inet {
address 192.168.1.20/24 {
vrrp-group 27 {
virtual-address 192.168.1.15;
priority 254;
}
}
}
}
}
On Router B [edit interfaces]
ge-4/2/0 {
unit 0 {
family inet {
address 192.168.1.24/24 {
vrrp-group 27 {
virtual-address 192.168.1.15;
665Copyright © 2017, Juniper Networks, Inc.
Chapter 21: Configuring Virtual Router Redundancy Protocol (VRRP)
To Next Page
Loading...
Need help?
General
