To Next Page

To Previous Page

Documentation

• Example: Configuring Tunnel Interfaces on a Gigabit Ethernet 40-Port DPC

• Example: Configuring Tunnel Interfaces on a 10-Gigabit Ethernet 4-Port DPC

• Example: Configuring Tunnel Interfaces on the MPC3E

• bandwidth (Tunnel Services) on page 1449

udp-tcp-port-swap (RFC 2544 Benchmarking)

Syntax udp-tcp-port-swap;

Hierarchy Level [edit services rpm rfc2544-benchmarkingtests test-name test-name]

Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.

Statement introduced in Junos OS Release 14.2 for MX104 3D Universal Edge routers.

Description Swap source and destination UDP ports in the test packets. Only UDP port swap and

UDP over IPv4 traffic is supported.

Required Privilege

Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Documentation

• rfc2544-benchmarking on page 1698

• RFC2544-Based Benchmarking Tests Overview

• Configuring an RFC 2544-Based Benchmarking Test

ACX Series Universal Access Router Configuration Guide

Juniper ACX1000 Configuration Guide

Other manuals for Juniper ACX1000