packet-size (RFC 2544 Benchmarking)
Syntax packet-size bytes;
Hierarchy Level [edit services rpm rfc2544-benchmarking profiles test-profile profile-name]
Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Description Define up to 10 packet sizes that are used sequentially for the test.
Options bytes—Size of the test packet. If you enter multiple packet sizes, you must separate each
number with a space.
Range: 64 through 9136 bytes
NOTE: The valid packet sizes are 64, 68, 72, 128, 256, 512, 768, 1024,
1280, 1518, 1522, 1600, 1728, 2496, 3584, 4016, 9104, and 9136 bytes. If
you specify a packet size other than the ones listed here as valid sizes,
the configuration is saved when you commit the setting and no error
message is displayed. However, when you start the test by entering the
test services rpm rfc2544-benchmarking test test-name start command,
an error message is displayed if you configured an invalid packet size in
the test profile associated with the test name.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• RFC 2544-Based Benchmarking Tests Overview on page 1335
• Configuring RFC 2544-Based Benchmarking Tests on page 1341
• rfc2544-benchmarking on page 1698
1653Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
