Juniper ACX1000 - Electrical Guidelines and Warnings; In Case of an Electrical Accident; General Electrical Safety Warnings for Juniper Networks Devices

oam {
ethernet {
connectivity-fault-management {
action-profile rmep-defaults {
default-action {
interface-down;
}
}
maintenance-domain d1 {
level 0;
maintenance-association 100 {
mep 1 {
interface ge-1/0/2;
remote-mep 2 {
action-profile rmep-defaults;
}
}
}
}
maintenance-domain d2 {
level 0;
maintenance-association 100 {
mep 1 {
interface ge-1/2/1;
remote-mep 2 {
action-profile rmep-defaults;
}
}
}
}
}
}
}
}
}
3. Configuring Node 3
interfaces {
ge-1/0/4 {
vlan-tagging;
encapsulation flexible-ethernet-services;
unit 1 {
encapsulation vlan-bridge;
vlan-id 1;
}
unit 100 {
encapsulation vlan-bridge;
vlan-id 100;
}
}
ge-1/0/3 {
vlan-tagging;
encapsulation flexible-ethernet-services;
unit 1 {
encapsulation vlan-bridge;
vlan-id 1;
}
unit 100 {
123Copyright © 2017, Juniper Networks, Inc.
Chapter 4: Configuring Interfaces and Chassis