7 Initial Start-up
7.1 Ensuring safety
Here you will find instructions for a safe commissioning of the machine.
Warning instructions are located before a potentially dangerous task.
Disregard of warning instructions can cause serious injuries!
Complying with safety notes
Disregard of safety notes can cause unforeseeable dangers!
➤ Follow the instructions in chapter 3 'Safety and Responsibility'.
➤ Commissioning tasks may only be carried out by authorised personnel!
➤ Make sure that no one is working on the machine.
➤ Ensure that all service doors and panels are locked.
Further information Details of authorised personnel are found in chapter 3.4.2.
Details of dangers and their avoidance are found in chapter
3.5.
7.2 Before Initial Start-up (or Recommissioning)
Incorrect or improper commissioning can cause injury to persons and damage to the machine.
7.2.1 Note when commissioning
The initial start-up of every machine takes place at the factory. Every machine is also given a
trial run and passes a careful check.
➤ Commissioning may only be carried out by authorised installation and service personnel who
have been trained on this machine.
➤ Remove all packing materials on and in the machine.
➤ Observe the machine during the first few hours of operation to ensure that it is operating cor‐
rectly.
7 Initial Start-up
7.1 Ensuring safety
60
Operator manual Portable compressor
M 64 No.: 9_5898 26 E
To Next Page
Loading...
