KAESER M 64 - Starting and Stopping; Running the Machine; Fig. 26 Starting Instruments

8.2 Starting and stopping
Precondition No personnel are working on the machine.
All doors and siding panels are closed.
NOTICE
Serious damage to engine from cold starting sprays.
Cold-start assists, such as ether or other sprays, can cause severe engine damage.
➤ Do not use cold start sprays.
Fig. 26 Starting instruments
1 «Controller On» switch
2 «Starter switch »
– STOP/Off
– On
– Preheat
– START
3 – «Load On» key with integrated
LOAD
mode indicating light
4
Charging indicator lamp, group alarm
lamp
5
Compressed air outlet pressure gauge
6 Temperature gauge switch
7 Operating hours counter
8 Indicator
fault on the diesel particulate filter
(Option lc only)
Notes concerning snow and ice
Considerable snow or ice may build up on the machine under low temperature conditions.
➤
Remove any snow and ice from the machine before operating.
8.2.1 Running the machine
1. Open the right-hand access door.
2. Turn the «Controller On» switch.
3. Close the door.
8 Operation
8.2 Starting and stopping
70
Operator manual Portable compressor
M 64 No.: 9_5898 26 E
RAMIRENT