Instructions for use ELECTROmatic TM and TMM/TMC
3 Description of the product | 3.2 Scope of delivery
Figure Material num-
ber
ELECTROmatic TM
ELECTROmatic TMM/TMC
ELECTROmatic
TM
ELECTROmatic
TMM
ELECTROmatic
TMC
Assembly instructions 1.013.0312
Note
Use exclusively the power cables and mains plugs approved in the specific
country. Use exclusively the power cables and mains plugs with the electrical
nominal data as listed in the following table.
Power cable Power plug IEC coupler
▪ H05 VV F 3G C131.00
▪ 250 VAC
▪ 10 A
▪ black
▪ 250 VAC
▪ 16 A
▪ black
▪ EN 60320 / C13
▪ 10 A
▪ 250 VAC
▪ black
The installation set is part of the scope of delivery of all versions and consists of
the following parts:
ELECTROmatic installation set (Mat. no. 1.012.1883)
Pos.
no.
Mat.No. Description Number
① 0.251.5804 Hexagonal nuts M4 6
② 0.242.4012 Washers 6
③ 1.004.1568 Offset screwdriver
SW5
1
④ 1.012.0213 Screws M4x12 8
⑤ 0.220.0441 Pad 4
19 / 90