14
BASIC SAFETY INSTRUCTIONS
1 Basic Safety Instructions
The COMBICONTROL is designed and constructed in accordance with state-of-the-art
technology and the recognised safety rules and regulations. However, the use of such
devices may cause functional hazards for life and limb of the user or third parties, or
damages to the system and other material property.
The following safety instructions have been created by the manufacturer for the area of
electric drive technology. They can be supplemented by local, country- or application-
specic safety instructions.This list is not exhaustive. Non-observance of the safety
instructions by the customer, user or other third party leads to the loss of all resulting
claims against the manufacturer.
NOTICE
Hazards and risks through ignorance.
► Read the instructions for use !
► Observe the safety and warning instructions !
► If anything is unclear, please contact KEB Automation KG !
1.1 Target Group
This manual is written for design, project planning, servicing and commissioning ex-
perts.Qualiedpersonnelforthepurposeofthisinstructionmanualmusthavethefol-
lowingqualications:
• Knowledge and understanding of the safety instructions.
• Knowledge of automation technology.
• Knowledge of functional safety.
• Skills for installation and assembly of electrical equipment.
• Detection of hazards and risks of the electrical drive technology.
• Understanding of the function in the used machine.
• Knowledge of the operation of the Windows operating system.
• Knowledge of DIN IEC 60364-5-54.
• Knowledge of EN 60204-1
• Knowledge of national safety regulations (e.g. DGUV regulation 3).
To Next Page
Loading...
Need help?
General
